When a construction worker is hurt in New York, three sections of the Labor Law often come up together: 240(1), 241(6), and 200. Section 240(1), the Scaffold Law, gets the most attention because of its absolute liability for elevation-related hazards. But many job site injuries do not involve a fall from height or a falling object. Trips over debris, cave-ins, electrical shocks, and equipment accidents are frequently analyzed under Labor Law 241(6) and Labor Law 200. This article explains how those two sections work. It is general information from Bisogno & Meyerson, LLP, not legal advice about any particular case.
Labor Law 241(6): Industrial Code Compliance
Section 241(6) requires that areas where construction, excavation, or demolition work is performed be constructed, shored, equipped, guarded, arranged, operated, and conducted so as to provide reasonable and adequate protection and safety to the people working there. The statute places this duty on owners and contractors and their agents. Owners of one- and two-family dwellings who contract for but do not direct or control the work are excluded.
A specific Industrial Code violation is required
The key to a 241(6) claim is the state Industrial Code, found in Part 23 of Title 12 of the New York Codes, Rules and Regulations. Courts have held that the worker must point to a provision that sets out a specific, concrete standard of conduct, not merely a general safety principle. Rules on slipping and tripping hazards, planking and flooring, shoring of trenches, guarding of power tools, and protection from falling objects are examples of the kinds of provisions that are often cited. Whether a particular provision is specific enough is a legal question that depends on its wording.
A nondelegable duty
Like section 240(1), the duty under 241(6) is nondelegable. An owner or general contractor can be responsible for a violation even if it did not supervise or control the work.
Comparative negligence applies
Here 241(6) differs from the Scaffold Law. Under 241(6), a violation of the Industrial Code is treated as some evidence of negligence, and the worker’s own comparative negligence can be considered and can reduce damages under CPLR 1411. Our article on comparative negligence explains how that reduction works.

Labor Law 200: The General Duty of Care
Labor Law 200 codifies the common-law duty of owners and contractors to provide workers with a reasonably safe place to work. Claims under section 200 generally fall into two categories.
Dangerous premises conditions
When an injury comes from a dangerous condition on the property, such as a hole in a floor or an icy walkway, the question is usually whether the owner or contractor created the condition or had actual or constructive notice of it and failed to fix it.
Means and methods of the work
When an injury comes from the way the work was performed, liability under section 200 generally requires that the owner or contractor had authority to supervise or control the method of the work. A general right to inspect or stop unsafe work is often not enough.
Comparative negligence also applies to section 200 claims.
How 240(1), 241(6), and 200 Work Together
A single accident can support claims under more than one section. A fall through an unguarded floor opening might be pleaded under 240(1) as an elevation-related hazard, under 241(6) based on Industrial Code rules for hazardous openings, and under 200 as a dangerous condition. When the facts fit 240(1), its absolute liability and the unavailability of the comparative negligence defense make it especially significant. Our article on Labor Law 240 and the Scaffold Law explains that statute, including the sole proximate cause and recalcitrant worker defenses.
Workers’ Compensation and Third Parties
Workers’ compensation benefits are generally available regardless of fault, and they usually bar a direct lawsuit against the worker’s employer. Labor Law claims are typically brought against the property owner, general contractor, or other entities that are not the employer. The firm’s construction accidents page and its page on fall from heights describe common situations, and our scaffold accident page discusses scaffold falls in New York City.
Evidence in 241(6) and 200 Claims
Because these claims focus on specific conditions and on who controlled the work, evidence matters. Helpful materials can include photographs of the area, site safety plans, daily logs, contracts between the owner and contractors, incident reports, and the names of foremen and co-workers. Conditions on a construction site change quickly, so documenting them early is important.
Deadlines
Most personal injury lawsuits in New York must be filed within three years under CPLR 214. When a public entity owns the property, a notice of claim is often due within 90 days, and the lawsuit deadline is usually shorter.
Talk With Our Firm
Bisogno & Meyerson, LLP has represented injured construction workers from its Brooklyn office at 7018 Fort Hamilton Pkwy, Brooklyn, NY 11228, since 1994. A free consultation can help you understand whether Labor Law 241(6), 200, or 240(1) may apply to your accident. It is not a prediction of any outcome.
Call (718) 745-8880 or contact us. Attorneys at the firm are Patrick Bisogno, Esq.; Michael C. Meyerson, Esq.; and George A. Silva, Esq.
Attorney Advertising. This page is general information from Bisogno & Meyerson, LLP, not legal advice. Prior results do not guarantee a similar outcome. Contacting the firm does not, by itself, create an attorney-client relationship.
